Bluetooth Subscriber IP Address |
(Data Wide, General) |
|
Bluetooth Subscriber IP Address |
(Data Wide, General) |
|
Allows you to define the IP (Internet
Protocol) Address to be assigned to the Subscriber Unit (SU) end of
the Bluetooth (BT) link. 
This feature applies
in all cases except Conventional
Systems having a selected Data
Profile; when a Conventional System has a Data Profile selected in
the Data Profile Selection field,
the Conventional System then uses the Bluetooth Subscriber IP Address
defined in the Data Profile's Bluetooth
Subscriber IP Address field.
|
For Managed Radios |
When Bluetooth Enable is "Enabled", and
when the radio is model / option capable.
The Network ID octets of this IP Address must match the Network ID octets of the Bluetooth Peer IP Address field.
(When octet1 is between 0-127, the IP Address = Class A and the Network ID = the first 1 octet, or When octet1 is between 128-191, the IP Address = Class B and the Network ID = the first 2 octets, or When octet1 is between 192-223, the IP Address = Class C and the Network ID = the first 3 octets) This IP Address: Cannot be completely equal to the Bluetooth Peer IP Address field (see above), and Cannot be equal to this page’s Subscriber IP Address 1 or Peer IP Address 1 |
Octet Values also: Must be between: [0-255], and Cannot all be "0", and Cannot all be 255 |
This IP Address's Default Value = 192.168.128.2 |
this feature is defined in the RMC's 
